Shock Mounts
Rubber shock mounts are flexible components that absorb vibrations and shocks, protecting equipment from damage and reducing noise. Commonly used in industrial, automotive, and aerospace applications, they isolate machinery from vibration, extending its lifespan and improving performance by preventing the transmission of unwanted motion
At AV Industrial Products, we manufacture and supply a range of shock mounts, including Cup Mounts, Flanged Rubber Mounts, Avionics Mounts, Plate Buffers and Wire Rope Isolaters.
Browse our products below or get in touch for more information.
Cup Shock Mounts
Cup Shock mounts are a relatively stiff product, ideal for applications where high frequency vibrations are predominant. The product is failsafe and ideal for both mobile and static applications. The outer metal cap offers protection from contaminants such as Oil and Fuel. The design of the shock mount also allows the product to be used in tension, although maximum loads should be derated.
Advantages:
■ Failsafe Design
■ Ideal for High Frequency Vibration
■ Excellent Shock Absorption
■ Can be used in Compression or TensionApplications:
■ Military Equipment
■ Electronics
■ HVAC
■ Motors & Compressors
Flanged Rubber Mounts
Flanged Mountings give high levels of deflection, providing excellent levels of vibration reduction and shock absorption both in the vertical and horizontal planes. They are particularly suited to isolating slow speed equipment.
Stainless Steel metals and Oil / Heat resistant rubbers available on request.
If you’re looking for specific Flanged Rubber Mounts which are available in a range of mounting hole sizes, get in touch with a member of our team on 0116 2461261 or email mail@avindustrialproducts.co.uk
Advantages:
■ Ideal for Slow Speed Equipment
■ Easy to Install
■ Low Cost
■ Vibration Isolation up to 95%Applications:
■ Pumps
■ Fans
■ Compressors
■ Vibratory Screens
■ Shock Packaging
Avionics Mount
Our low-frequency rubber shock mounts are designed to securely support electrical and mechanical components within the aircraft, including cockpit instruments, air conditioning units, and flight control electrical components, providing effective protection from shock and vibration.
Advantages:
■ Vibration Isolation
■ Ease of Installation
■ Excellent Levels of Vibration Absorption
■ Improved Performance
Square Flanged Rubber Mounts
Flanged Mountings give high levels of deflection, providing excellent levels of vibration reduction and shock absorption both in the vertical and horizontal planes. They are particularly suited to isolating slow speed equipment.
Stainless Steel metals and Oil / Heat resistant rubbers available on request.
Advantages:
■ Ideal for Slow Speed Equipment
■ Easy to Install
■ Low Cost
■ Vibration Isolation up to 95%Applications:
■ Pumps
■ Fans
■ Compressors
■ Vibratory Screens
■ Shock Packaging
High Deflection Flanged Mounts
HD Flanged Mountings offer high levels of deflection, providing excellent levels of vibration reduction and shock absorption both in the vertical and horizontal planes. The metals are encapsulated in rubber to provide excellent corrosion resistance.
Advantages:
■ High Deflection
■ Easy to Install
■ Encapsulated Metals
■ Common Height throughout product rangeApplications:
■ Pumps
■ HVAC (Fans)
■ Compressors
■ Shock protection
Square Plate Buffers
Square Plate buffers provide a Heavy Duty solution for absorbing high levels of shock and impact forces. The large rubber section allows for high levels of deformation, ensuring that the impact energy is dissipated effectively.
Square Plate Rubber Bump Stops can be used in a wide variety of applications, including Construction, Agricultural, Commercial Vehicle and General Industrial Machinery.
Applications
■ Construction Equipment and Vehicles
■ Mining and Quarry Equipment
■ Agricultural Vehicles
■ Lifts and Elevators
■ General Industrial Machinery
Wire Rope Isolators
Wire Rope Shock mountings are an “All Metal” design, providing multidirectional absorption of High Level Shock and Vibration. The all-metallic design allows these mountings to be used in extremely harsh conditions, including corrosive and high temperature environments. The mountings can be manufactured in various designs and configurations, where the wire rope can be produced in Galvanised Steel or Stainless Steel, with load ranges from 0.1Kg to 5000Kg.
Non-Magnetic Versions available on request.
Applications:
■ Naval Vessels
■ Military & Defence
■ Aerospace
■ Transit Packaging
